Compression Connector DIN 48085, tension-proof, Cu 25 mm2 RE
The crimp connections are used to form a full-tension connection between DIN 48201 Cu cables and hold the cable with at least 85% of the breaking load specified in VDE 0210. Fitting up to 95 mm2 is installed with the PRIMAT O6T manual crimping plier. Above that it is installed with hydraulically size III compression tools.
Material:E-Cu, uncoated surfaceDB drawing no.: Ebs 20.01.17
Technical Data
| Article no. | 300 945 945 | |
|---|---|---|
| Type | tension proof Cu | |
| Conductor cross section | (mm2) | 25 |
| Diameter of conductor | Ø (mm) | 5.65 |
| Diameter of conductor not standardised, max. | Ø (mm) | 5.65 |
| Material | Cu | |
| Surface | uncoated | |
| Code number | 10 | |
| Number of compressions, hydraulic St | - | |
| Number of compressions, mech. St | 6-6 | |
| Number of compressions, mech. / hydr. | 6-6/- | |
| Oil stop | no | |
Dimensions
| Dimension D | d (mm) | 7 |
|---|---|---|
| Dimension L | (mm) | 95 |