Flat Direkta Terminal Clamp
The universal multi-range direct terminal clamps are suitable for connecting copper and aluminium conductors to flat busbars.
A good electrical contact and a low contact resistance are ensured by grooves in the conductor channel and the lower part of the clamp.
The grooves in the lower part of the clamp also provide protection against torsion during assembly.
The flat “Direkta” clamps can be used in service boxes, cable distributing cabinets, for switch-gear, distributing boards, machines and engines.
The double terminal clamps are intended for use in distribution terminals, above-ground sealing boxes or isolating switch-boards with several outgoing units.
|Article no.||332 028 004|
|Number of conductor||1|
|Conductor Cross Sections||(mm2)||95 - 300 RE/RM|
|Screw||without hexagon screw and nut|
DownloadsData sheet as pdf-file
Drawing as pdf-file
We reserve the right to make technical changes.