Low Voltage Screw Connector, with inspection hole
The low voltage connectors meet the requirements of the DIN SPEC 47640 standard. No rework is necessary for heat shrinking over the connectors.
This article contains 5 pieces in a polybag.Technical Data
Article no. | 332 801 121 00001 | |
---|---|---|
Conductor cross section Cu RE | (mm2) | 1,5 - 16 |
Conductor cross section Cu RM | (mm2) | 1,5 - 16 |
Conductor cross section Cu SM | (mm2) | 1,5 - 16 |
Material connector body | brass, uncoated | |
Inspection hole | yes | |
Oil stop | no | |
Material screws | stainless steel, uncoated | |
Number of screws | 2 | |
Width across flats | 2.5 (inner hexagon) | |
Screw Type | grub screw | |
Packing unit | 5 |
Dimensions
Outer diameter | Ø (mm) | 10 |
---|---|---|
Body Length | (mm) | 30 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file