Protective Cap for CONNEX Separable Connectors Size 0 and 1, not voltage proof, IPX7
Protective caps protect the sensitive contact system and silicone insulating part of fully assembled CONNEX Separable Connectors, Surge Arresters or other inner cone plug-in accessories against mechanical damage, dirt and moisture. The protective caps made of thermoplastic resin also offer special protection against impacts. Protection during the period between assembly and plug-in and especially during storage is essential for reliable operation of the entire system.
Technical Information:- Not voltage proof
- Dust- and waterproof, IPX7
- Inner cone EN 50180
- Reusable
- Easy mounting
- Cut protection
- Shock and impact protection
This protecting cap is not suitable for the assembly of separable connectors.
Technical Data
| Article no. | 566 708 001 | |
|---|---|---|
| Size | 0, 1 | |
| Applicable standards | EN 50180 | |
| Material | thermoplastic resin | |
| Production method | injection moulding | |
| Working place | indoor, outdoor and offshore | |
| Environment temperature | (°C) | -40°C up to 50°C |
| Protection Type | IP X7 | |
| Highest voltage | Um (kV) | not voltage proof |
| Nominal voltage | Un (kV) | not voltage proof |
| Rated design voltage to ground | U0 (kV) | not voltage proof |
| Weight | (kg) | 0.2 |
Dimensions
| Diameter | (mm) | 115 |
|---|---|---|
| Length | (mm) | 163 |
| Pitch circle diameter | (mm) | 95 |