Protective Cap for CONNEX Separable Connectors Size 2, not voltage proof, IPX7
Protective caps protect the sensitive contact system and silicone insulating part of fully assembled CONNEX Separable Connectors, Surge Arresters or other inner cone plug-in accessories against mechanical damage, dirt and moisture. The protective caps made of fibre-glass reinforced polypropylene also offer special protection against impacts. Protection during the period between assembly and plug-in and especially during storage is essential for reliable operation of the entire system.
Technical Information:- Not voltage proof
- Dust- and waterproof, IPX7
- Inner cone EN 50180
- Reusable
- Easy mounting
- Cut protection
- Shock and impact protection
This protecting cap is not suitable for the assembly of separable connectors.
Technical Data
Article no. | 566 708 009 | |
---|---|---|
Size | 2 | |
Applicable standards | EN 50180 | |
Material | glass fiber reinforced polypropylene | |
Production method | injection moulding | |
Working place | indoor, outdoor and offshore | |
Environment temperature | (°C) | -40°C up to 50°C |
Protection Type | IP X7 | |
Highest voltage | Um (kV) | not voltage proof |
Nominal voltage | Un (kV) | not voltage proof |
Rated design voltage to ground | U0 (kV) | not voltage proof |
Weight | (kg) | 0.3 |
Dimensions
Diameter | (mm) | 126 |
---|---|---|
Length | (mm) | 153 |
Pitch circle diameter | (mm) | 102 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file