Picture may vary.

CONNEX Separable Connector, Size 0, up to 24 kV

Application:

  • Pluggable separable connector for all XLPE- and EPR-cables
  • After preassembly on the cable, it can be plugged in to any CONNEX component of a compatible size

Characteristics:

  • The separable connector is installed without any gas- and oilwork at the transformer or GIS
  • Considerably reduced installation time and safe installation due to plug-in-technology
  • Horizontal, vertical and angeled versions for connection to GIS and transformers
  • Rapid separation and change of cable and equipment possible
  • Touchproof, submersible and maintenance-free
  • No leakage and environmental risks due to dry-type insulation
  • Individual variant creation based on cable data

Technical Data

Article no. 809 999 999
Size 0
Max. system voltage Um (kV) 24
Nominal voltage Un (kV) 20
Conductor residual voltage U0 (kV) 12
Applicable standards DIN VDE 0278-629-1, EN 50180-1, EN 50181
Capacitive voltage tap without
Working place indoor and outdoor
offshore optional
Lightning impulse withstand voltage BIL (kV) 125
AC withstand voltage - 5 min (kV) 54
Partial discharge test < 10pC at (kV) 24
Heating cycles AC voltage (kV) 30
Rated current In (A) 250
Rated short-time withstand current 1 s Ith (kA) 16
Max. dynamic short circuit current Id (kA) 40
Conductor material copper or aluminium
Conductor diameter stranded circular (mm) 5.6 - 11.9
Conductor cross section stranded circular (mm2) 25 - 70
Diameter over insulation (mm) 12.7 - 23.5
Connection method Compression connection
Cable specification any standard

Downloads

Data sheet as pdf-file
Drawing as pdf-file
Specification Form for MV CONNEX Separable Connectors
Guide to Specification form MV CONNEX

Videos

Your request