CONNEX Socket, Size 4 for GIS, up to 72.5 kV
Application:
- Socket for mounting into gas-insulated switchgears (GIS), gas-insulated transformers, joints and other gas-insulated equipment
- Testing of switchgear in factory due to short time amount for plugging the accessories
- Assembly time is significantly reduced and safe assembling guaranteed
- Touch-proof, maintenance-free and floodable (IP67)
Technical Data
Article no. | 828 040 999 00003 | |
---|---|---|
Size | 4 | |
Max. system voltage | Um (kV) | 72.5 |
Nominal voltage | Un (kV) | 60 - 69 |
Conductor residual voltage | U0 (kV) | 36 |
Applicable standards | IEC 62271-209 (Fig.3) | |
Fitting length | (mm) | 583 |
Pitch circle diameter | (mm) | 270 |
Diameter of flange opening | (mm) | 200 |
Capacitive voltage tap | without | |
Working place | outdoor, indoor and offshore | |
Insulation medium | gas | |
Routine test: AC withstand voltage 1 min. | (kV) | 160 |
Routine test: Partial discharge test < 2 pC at | (kV) | 140 |
Rated lightning impulse withstand voltage BIL | (kV) | 325 |
Nominal current | IN (A) | 2500 |
Max. dynamic short circuit current | (kA) | 160 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file