Voltage Detector KP-Test 5A, 10 - 24 kV, for Capacitive Measuring Points on Outer Cone
The capacitive voltage detector KP-Test 5A is only usable at capacitive measuring points of outer cone's cable connectors according to DIN VDE 0278-629-1. Due to the innovative contact electrode attachment the cover caps of the voltage tap could be easily removed before testing.
- Nominal voltage range: 10 - 24 kV
- Nominal frequency: 50 Hz
- Designed and type-tested according to IEC 61243-1
- Double signalling
- Integrated audible signal
- Extremely bright LEDs
- Maximum resistance to interference fields
- Can be used in rain and snow
- Self-test at switch-on
- Removeable contact electrode attachment to pull-off the cover cap
Technical Data
| Article no. | 930 190 001 00522 | |
|---|---|---|
| Nominal voltage | Un (kV) | 10 - 24 |
| Nominal frequency | fN (Hz) | 50 |
| Suitable bag | A1 | |
| suitable case | K3 | |
| Voltage type | AC | |
| Area of application |
Capacitive measuring point outer cone cable connectors according to DIN VDE 0278-629-1 |
|
| Type of device | complete | |
| Language on labels | de | |
| Climate class | W, N | |
| Contact electrode | Ring electrode with M8 internal thread | |
| Design | indoor and outdoor | |
| Handle | made of ribbed solid rubber | |
| Power supply | 2 x lithium batteries | |
| Type | KP-Test 5A | |
| Type tested according to | IEC 61243-1 | |
Dimensions
| Total length | LG (mm) | 887 |
|---|---|---|
| Penetration depth | Ai (mm) | 220 |
| Length of handle | LH (mm) | 135 |
| Diameter of insulating element | d (mm) | 24 |
| Length of insulating element | LI (mm) | 520 |
