Voltage Detector KP-Test 5 dual, switchable, 10 - 20 kV and 20 - 36 kV
The capacitive voltage detector KP-Test 5 dual can be switched between two nominal voltage ranges. Otherwise it is identical in construction to the KP-Test 5. It is used for medium voltage switchgears and medium voltage overhead lines. Thereby it is suitable for indoor and outdoor use.
- Nominal voltage range: 10 - 20 kV and 20 - 36 kV
- Nominal frequency: 50 Hz
- Designed and type-tested according to IEC 61243-1
- Length of insulating element when assembled 520 mm
- Double signalling
- Integrated audible signal
- Extremely bright LEDs
- Maximum resistance to interference fields
- Self-test at switch-on
- Can be used in rain and snow
- Removeable forked electrode for overhead lines is included in the scope of delivery
Technical Data
| Article no. | 930 190 501 00109 | |
|---|---|---|
|
Nominal voltage level I |
Un (kV) | 10 - 20 |
|
Nominal voltage level II |
Un (kV) | 20 - 36 |
| Nominal frequency | fN (Hz) | 50 |
| Suitable bag | A2 | |
| suitable case | K4 | |
| Voltage type | AC | |
| Area of application | Switchgear / Overhead Line | |
| Type of device | complete | |
| Language on labels | en | |
| Climate class | W, N | |
| Contact electrode | Ring electrode with M8 internal thread | |
| Design | indoor and outdoor | |
| Handle | made of ribbed solid rubber | |
| Power supply | 2 x lithium batteries | |
| Type | KP-Test 5 dual | |
| Type tested according to | IEC 61243-1 | |
Dimensions
| Total length | LG (mm) | 1730 |
|---|---|---|
| Penetration depth | Ai (mm) | 910 |
| Length of handle | LH (mm) | 288 |
| Diameter of insulating element | d (mm) | 24 |
| Length of insulating element | LI (mm) | 520 |
