EST72-C19L
For electricity pylons
The IXOSIL EST is fitted to the cable whilst on the ground and subsequently raised up onto the pylon. No erecting scaffold is required. The switch-off time of the overhead power line is minimised.
- Quick and esay to install
- Oil and gas-free - leak-proof
- Maintance-free
- 100% electrically individually tested
- Proven technology
Technical Data
| Article no. | EST72-C19L | |
|---|---|---|
| Max. system voltage | Um (kV) | 72.5 |
| Type of cable termination | dry, self supporting for towers | |
| Applicable standard | IEC 60840 | |
| Rated lightning impulse withstand voltage BIL | (kV) | 325 |
| Conductor cross section | (mm2) | 95 - 1200 |
| Diameter over cable insulation | (mm) | 32.5 - 64.4 |
| Minimum creepage distance | (mm) | 1813 |
Downloads
Data sheet as pdf-fileVideos
Accessories
© 2022 PFISTERER Holding AG
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection