Two-stage high pressure pump, freely positionable, with compression head size III
The high pressure unit with an operating pressure of 850 bar for manual operation (hand or foot operated) is mounted in a reclined position on a galvanised U-frame.
The high pressure hose is equipped with an oil-tight coupler for connecting the compression head. The pump operates with rapid feed up to the start of compression, i.e. few working strokes are required. A pressure relief valve protects the pump and the compression head from overloading.
- Case for high pressure press
- Pressure gauge, 0-1000 bar
Technical Data
Article no. | 305 800 011 | |
---|---|---|
Operating pressure | (bar) | 850 |
Hose length | (mm) | 3000 |
General purpose | Freely positionable | |
Hydraulic oil | (cm3) | 600 |
Nominal compression force | (kN) | 240 |
including compression head | yes |
Downloads
Data sheet as pdf-fileAccessories
© 2024 PFISTERER Holding SE
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection