Connecta II Four Core Connection Clamp 4 x 25 - 150 mm2
Properties:
- Multiple range use (SM, SE, RM and RE conductors)
- Applicable on Al and Cu conductors
- Compact, space-saving design, developed for all common resin based plastic and cast iron sleeves
- Simple, time-saving assembly without special tools
- No round pressing of sector conductors
- Contacting using SICON NG shear bolts
- Tested according to IEC 61238-1
Connector body: Al-Alloy (AlMgSi), tin-plated
Screws: brass (CuZn)
Technical Data
| Article no. | 332 149 001 | |
|---|---|---|
| Conductor cross section Al RE | (mm2) | 25 - 150 |
| Conductor cross section Al RM | (mm2) | 25 - 150 |
| Conductor cross section Al SE | (mm2) | 25 - 150 |
| Conductor cross section Al SM | (mm2) | 25 - 150 |
| Conductor cross section Cu RE | (mm2) | 25 - 150 |
| Conductor cross section Cu RM | (mm2) | 25 - 150 |
| Conductor cross section Cu SM | (mm2) | 25 - 150 |
| Material connector body | aluminium tin-plated | |
| Inspection hole | yes | |
| Oil stop | no | |
| Material screws | brass tin-plated | |
| Width across flats | SW6 | |
| Screw Type | shear bolt | |
| Shear-off torque | (Nm) | 35 +/- 4 |
Dimensions
| Dimension L | (mm) | 85 |
|---|---|---|
| Circumscribed circle diameter | (mm) | 74 |
| Core diameter | Ø (mm) | 19.3 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file