Tap Connector for Insulated Overhead Lines (ABC)
Plastic connector of plastic with inserted contact plates, suitable for installation on live lines.
When tightening the screws, the teeth on the contact plates penetrate the insulation and establish a contact that is resistant to constant current. The conductors do not need to be stripped. Clamp channel covers cover the conductor ends to the outer edges of the clamp. If covers are not needed, they can easily be broken off cleanly.
- Contact plates: copper alloy
- Body: fibre glass reinforced plastic material
- Pressure plates and screws: steel, hot- galvanized
Technical Data
Article no. | 332 305 001 | |
---|---|---|
Main cable cross section round stranded | (mm2) | 16 - 95 |
Branch conductor cross section round stranded | (mm2) | 1,5 - 6 |
Tap covers | 1 | |
Number of screws | 1 | |
Screw | M8 | |
Torque | (Nm) | 15 |
Dimensions
Length | (mm) | 25 |
---|---|---|
Width | (mm) | 36 |
Height | (mm) | 55 |
Downloads
Data sheet as pdf-fileAccessories
© 2024 PFISTERER Holding SE
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection