ISICONNECTA 25 -150 Cu, 50 Al RE/SE + 70-150 Al + 185 SE
Insulated low-voltage screw connector with insulation piercing contact geometry. The special plate screw prevends the conductor from being damaged while mounted. The connector is designed to prevent contact with potentially live parts after insertion of the conductors and also precludes short-circuit hazards
Advantages:- No insulation stripping from individual conductors
- Contact protection as per IP1X after inserting the conductors
- Simple, safe assembly
- Electrically and mechanically tested according to IEC 61238-1
- Designed for resin based, injection and heat shrink joints
Technical Data
| Article no. | 332 710 001 | |
|---|---|---|
| Conductor cross section Al RE | (mm2) | 50 - 150 |
| Conductor cross section Al RM | (mm2) | 70 - 150 |
| Conductor cross section Al SE | (mm2) | 50 - 185 |
| Conductor cross section Al SM | (mm2) | 70 - 150 |
| Conductor cross section Cu RE | (mm2) | 25 - 150 |
| Conductor cross section Cu RM | (mm2) | 25 - 150 |
| Conductor cross section Cu SM | (mm2) | 25 - 150 |
| Inspection hole | yes | |
| Number of screws | 4 | |
| Width across flats | SW 6 | |
| Screw Type | clamping screw | |
| Torque | (Nm) | 20 |
| Surface | tin-plated | |
Dimensions
| Length | (mm) | 115 |
|---|---|---|
| Width | (mm) | 40 |
| Height | (mm) | 53 |
| Core diameter | Ø (mm) | 26 / 19 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file