CONNEX Socket, Size 2, for Railway Transformers, up to 25 KV
Application:
- Socket for mounting into railway transformers up to 25 kV
- Insulating medium: oil (max. operating temperature: 110°C)
- Attention: With XLPE-insulated cable the max. temperature of the conductor must not be higher than 90°C.
- Testing of transformer in factory due to short time amount for plugging the accessories
- Assembly time is significantly reduced and safe assembling guaranteed
- Touch-proof, maintenance-free and floodable (IP67)
- 100% X-ray tested
Technical Data
| Article no. | 827 104 208 | |
|---|---|---|
| Size | 2 | |
| Max. system voltage | Um (kV) | 25 |
| Nominal voltage | Un (kV) | 20 |
| Conductor Earth Voltage | U0 (kV) | 12 |
| Applicable standards | DIN VDE 0278-629-1, EN 50180-1 | |
| Pitch circle diameter for fastening | (mm) | 102 |
| incl. sealing and fastening set | yes | |
| Working place | indoor, outdoor and offshore | |
| Insulation medium | mineral oil or ester | |
| Nominal current | IN (A) | 800 |
| Max. dynamic short circuit current | (kA) | 125 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file
Accessories
© 2024 PFISTERER Holding SE
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection