CONNEX Transformer Elbow Bushing, Size 0, up to 24 kV
Application:
- Elbow bushing for mounting into transformers
- Insulating medium: oil (max. operating temperature: 100°C)
- When mounted, swivelling up to 260° possible
- Testing of transformer in factory due to short time amount for plugging the accessories
- Assembly time is significantly reduced and safe assembling guaranteed
- Touch-proof and maintenance-free
- Not offshore-proof
Technical Data
| Article no. | 827 107 107 | |
|---|---|---|
| Size | 0 | |
| Max. system voltage | Um (kV) | 24 |
| Nominal voltage | Un (kV) | 20 |
| Conductor Earth Voltage | U0 (kV) | 12 |
| Applicable standards | EN 50180-3 | |
| Cone length inside transformer | (mm) | 107 |
| Pitch circle diameter for fastening | (mm) | 123 |
| Thread | M10 | |
| Working place | indoor and outdoor | |
| Insulation medium | mineral oil or ester | |
| Rated lightning impulse withstand voltage BIL | (kV) | 125 |
| Nominal current | IN (A) | 250 |
| Max. dynamic short circuit current | (kA) | 40 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file
