CONNEX Socket, Size 6-S, for GIS, up to 245 kV
Application:
- Socket for mounting into gas-insulated switchgears (GIS), gas-insulated transformers, joints and other gas-insulated equipment
- Testing of switchgear in factory due to short time amount for plugging the accessories
- Assembly time is significantly reduced and safe assembling guaranteed
- Touch-proof, maintenance-free and floodable (IP67)
Technical Data
Article no. | 828 065 999 00024 | |
---|---|---|
Size | 6-S | |
Max. system voltage | Um (kV) | 245 |
Nominal voltage | Un (kV) | 220 - 230 |
Conductor residual voltage | U0 (kV) | 127 - 133 |
Applicable standards | IEC 62271-209 (Fig.5) | |
Fitting length | (mm) | 620 |
Pitch circle diameter | (mm) | 475 |
Diameter of flange opening | (mm) | 385 |
Capacitive voltage tap | without | |
Working place | outdoor, indoor and offshore | |
Insulation medium | gas | |
Routine test: AC withstand voltage 1 min. | (kV) | 460 |
Routine test: Partial discharge test < 2 pC at | (kV) | 320 |
Rated lightning impulse withstand voltage BIL | (kV) | 1050 |
Nominal current | IN (A) | 2500 |
Max. dynamic short circuit current | (kA) | 160 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file