CONNEX Separable Connectors, Size 5-S, up to 145 kV
Application:
- Pluggable separable connector for all XLPE cables
- Available as factory-tested and preassembled field installation cable
- The separable connector is installed without any gas- and oilwork at the transformer or GIS
- Considerably reduced installation time and safe installation
- Horizontal, vertical and angeled versions for connection to GIS and tranformers
- Rapid separation and change of cable and equipment possible
- Touchproof, submersible, and maintenance-free
- Routine-tested from factory
Technical Data
| Article no. | 859 999 999 xxxxx | |
|---|---|---|
| Max. system voltage | Um (kV) | 145 |
| Size | 5-S | |
| Type designation | dry-type termination | |
| Applicable standards | IEC 60840:2011 | |
| Working place |
outdoor and indoor offshore on request |
|
| Nominal voltage | Un (kV) | 132 - 138 |
| Conductor residual voltage | U0 (kV) | 76 - 80 |
| Rated power frequency withstand voltage | 1 min (kV) | 275 |
| Rated lightning impulse withstand voltage BIL | (kV) | 650 |
| Heating cycles | (kV) | 190 |
| Partial discharge test < 5pc at | (kV) | 114 |
| Rated power frequency withstand voltage - 30 min | (kV) | 190 |
| Partial discharge test < 2pC at | (kV) | 114 |
| Nominal current*) | IN (A) | 2500 |
| Rated short-time withstand current | (kA) | 50 |
| Rated impulse current CALCULATED | (kA) | 160 |
| Conductor material | copper or aluminium | |
| Diameter of conductor | Ø (mm) | 9.3 - 50.4 |
| Conductor cross section area | (mm2) | 95 - 1600 |
| Diameter of insulating | (mm) | 36.5 - 76 |
| Connection method | Compression connection | |
Downloads
Data sheet as pdf-fileDrawing as pdf-file
CONNEX Order Form
Videos
Accessories
© 2024 PFISTERER Holding SE
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection