Distance Voltage Detector KP-Test 5D-S dual, 110 kV and 220 - 420 kV, with Carrying Bag
The capacitive distance voltage detector KP-Test 5D-S dual is used at open-air switchgears with nominal voltages between 110 kV and 420 kV. It consists of two parts and depending on the application it can be used with or without a handle extension. The contact arm defines the correct contact point on the insulator and prevents incorrect measurements due to parallax errors.
In addition this capacitive voltage detector is switchable between two nominal voltage ranges. That means a larger network area can be covered while maintaining the same interference field safety. A proportional acoustic warning sound, which warn the operator with a warning tone becoming faster and faster when approach live line system.- Nominal voltage ranges between:
110 kV and 220-420 kV - Nominal frequency: 50 Hz
- Designed and type-tested according to the principle of testing GS-ET-32
- Double signalling
- Integrated audible signal
- Extremely bright LEDs
- Proportional acoustic warning sound
- Maximum resistance to interference fields
- Self-test at switch-on
- Can be used in rain and snow
Technical Data
| Article no. | 930 470 502 00001 | |
|---|---|---|
|
Nominal voltage level I |
Un (kV) | 110 |
|
Nominal voltage level II |
Un (kV) | 220 - 420 |
| Quantity of insulating poles | 2 | |
| Suitable bag | B1 | |
| Carrying bag included | yes | |
| Voltage type | AC | |
| Area of application | open-air switchgear | |
| Type of device | complete | |
| Language on labels | de | |
| Climate class | W, N | |
| Design | outdoor | |
| Power supply | 2 x lithium batteries | |
| Type | KP-Test 5D-S dual | |
| Type tested according to | GS-ET-32 | |
Dimensions
| Total length | LG (mm) | 1880 |
|---|---|---|
| Penetration depth | Ai (mm) | 250 |
| Insulating length | LI (mm) | 410 |
| Transporting length | LT (mm) | 1000 |
| Diameter of insulating element | d (mm) | 24 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file
