EST170-C53L
For electricity pylons
The IXOSIL EST is fitted to the cable whilst on the ground and subsequently raised up onto the pylon. No erecting scaffold is required. The switch-off time of the overhead power line is minimised.
- Quick and esay to install
- Oil and gas-free - leak-proof
- Maintance-free
- 100% electrically individually tested
- Proven technology
Technical Data
Article no. | EST170-C53L | |
---|---|---|
Max. system voltage | Um (kV) | 170 |
Type of cable termination | dry, self supporting for towers | |
Applied standard | IEC 60840 | |
Rated lightning impulse withstand voltage BIL | (kV) | 750 |
Conductor cross section | (mm2) | 240 - 2000 |
Diameter over cable insulation | (mm) | 52 - 115 |
Minimum creepage distance | (mm) | 5270 |
Downloads
Data sheet as pdf-fileVideos
Accessories
© 2022 PFISTERER Holding AG
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection