Low Voltage Screw Connector, with inspection hole
The low voltage connectors meet the bolt protrusion requirements of the DIN SPEC 47640 standard. No rework is necessary for heat shrinking over the connectors.
This article contains 4 pieces in a polybag.Technical Data
| Article no. | 332 801 120 00001 | |
|---|---|---|
| Conductor cross section Cu RE | (mm2) | 1,5 - 16 |
| Conductor cross section Cu RM | (mm2) | 1,5 - 16 |
| Conductor cross section Cu SM | (mm2) | 1,5 - 16 |
| Number of screws | 2 | |
| Surface | uncoated | |
| Width across flats | 2.5 (inner hexagon) | |
| Screw Type | stud screw | |
| Inspection hole | yes | |
| Blind hole | no | |
| Packing unit | 4 | |
Dimensions
| Outer diameter | Ø (mm) | 10 |
|---|---|---|
| Body Length | (mm) | 30 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file
Accessories
© 2024 PFISTERER Holding SE
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection