Universal tap connector brass
Cable branches can be mounted easily on 1 kV ground cables by using this universal tap connector. The single wire terminal offers maximum flexibility and is usable for both aluminium and copper cables with different conductor designs.
Material:- Body: brass (CuZn), galvanic tinned
- Screws: A2-70
Technical Data
Article no. | 330 433 433 | |
---|---|---|
Conductor cross section Al stranded circular | (mm2) | 16 - 95 |
Conductor cross section Cu stranded circular | (mm2) | 16 - 95 |
Conductor cross section Al stranded sector-shaped | (mm2) | 16 - 95 |
Conductor cross section Cu stranded sector-shaped | (mm2) | 16 - 95 |
Cross section of tap conductor | (mm2) | 4 - 25 |
Screw | M8 | |
Tightening torque | (Nm) | 25 |
Number of tap covers | 1 |
Dimensions
Length | (mm) | 17.5 |
---|---|---|
Width | (mm) | 32 |
Downloads
Data sheet as pdf-fileAccessories
© 2024 PFISTERER Holding SE
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection