Universal tap connector brass
Cable branches can be mounted easily on 1 kV ground cables by using this universal tap connector. The single wire terminal offers maximum flexibility and is usable for both aluminium and copper cables with different conductor designs.
Material:- Body: brass (CuZn), galvanic tinned
- Screws: A2-70
Technical Data
| Article no. | 330 435 435 | |
|---|---|---|
| Conductor cross section Al stranded circular | (mm2) | 50 - 185 |
| Conductor cross section Cu stranded circular | (mm2) | 50 - 185 |
| Conductor cross section Al stranded sector-shaped | (mm2) | 50 - 185 |
| Conductor cross section Cu stranded sector-shaped | (mm2) | 50 - 185 |
| Cross section of tap conductor | (mm2) | 6 - 50 |
| Screw | M8 | |
| Tightening torque | (Nm) | 25 |
| Number of tap covers | 1 | |
Dimensions
| Length | (mm) | 18 |
|---|---|---|
| Width | (mm) | 41 |
Downloads
Data sheet as pdf-fileAccessories
© 2024 PFISTERER Holding SE
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection