2DIREKT Single Wire Transformer Terminal Clamp
for terminal bolts compliant with DIN EN 50386.
For horizontal or vertical connection of Cu or Al cables to the secondary side of distribution transformers with DIN EN 50386 compliant bolted connections (1 kV).2DIREKT terminal clamps are type tested in compliance with IEC 61238 with Cu cables, 240 mm2.Material:Body: high-strength Al alloy, tin-plated
Bolts: Steel, zinc based coatingWidth across flats 8 for thrust bolts, 55Nm.Other types on request.
Technical Data
| Article no. | 331 745 003 | |
|---|---|---|
| Number of conductor | 1 | |
| Connection possibility | horizontal, vertical | |
| Conductor Cross Sections | (mm2) | 35 - 240 |
| Conductor type | round stranded flexible, round stranded, sector shaped stranded | |
| Bolted connection | (mm) | M16 |
| min. distance between termination | (mm) | 67 |
Dimensions
| Length | (mm) | 64 |
|---|---|---|
| Width | (mm) | 30 |
| Height | (mm) | 34 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file
Videos
Accessories
© 2024 PFISTERER Holding SE
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection