Protective Cap for CONNEX Separable Connectors Size 3 / 3-S / 3A, not voltage proof, IPX7
Protective caps protect the sensitive contact system and silicone insulating part of fully assembled CONNEX Separable Connectors, Surge Arresters or other inner cone plug-in accessories against mechanical damage, dirt and moisture. The protective caps made of fibre-glass reinforced polypropylene also offer special protection against impacts. Protection during the period between assembly and plug-in and especially during storage is essential for reliable operation of the entire system.
Technical Information:- Not voltage proof
- Dust- and waterproof, IPX7
- Inner cone EN 50180
- Reusable
- Easy mounting
- Cut protection
- Shock and impact protection
This protecting cap is not suitable for the assembly of separable connectors.
Technical Data
Article no. | 566 708 010 | |
---|---|---|
Size | 3, 3-S, 3A | |
Applicable standards | EN 50180 | |
Material | glass fiber reinforced polypropylene | |
Production method | injection moulding | |
Working place | indoor, outdoor and offshore | |
Environment temperature | (°C) | -40°C up to 50°C |
Protection Type | IP X7 | |
Highest voltage | Um (kV) | not voltage proof |
Nominal voltage | Un (kV) | not voltage proof |
Rated design voltage to ground | U0 (kV) | not voltage proof |
Weight | (kg) | 0.5 |
Dimensions
Diameter | (mm) | 153 |
---|---|---|
Length | (mm) | 213 |
Pitch circle diameter | (mm) | 130 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file
Accessories
© 2024 PFISTERER Holding SE
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection