CONNEX Quadruple Elbow Bushing, Size 3, up to 42 kV
Application:
- Elbow Bushing for mounting into transformers
- For clamping and plug-in type connection
- Enables plug-in of four CONNEX components
- Insulating medium: oil (max. operating temperature: 100°C)
- Testing of transformer in factory due to short time amount for plugging the accessories
- Assembly time is significantly reduced and safe assembling guaranteed
- Touch-proof, maintenance-free and floodable (IP67)
Technical Data
| Article no. | 827 146 836 | |
|---|---|---|
| Size | 3 | |
| Max. system voltage | Um (kV) | 42 |
| Nominal voltage | Un (kV) | 36 |
| Conductor Earth Voltage | U0 (kV) | 20.8 |
| Applicable standards | EN 50180-3 | |
| Cone length inside transformer | (mm) | 300 |
| Pitch circle diameter for fastening | (mm) | 200 |
| Cone | long | |
| Working place | indoor, outdoor and offshore | |
| Insulation medium | mineral oil or ester | |
| Routine test: AC withstand voltage 1 min. | (kV) | 84 |
| Routine test: Partial discharge test < 5 pC at | (kV) | 42 |
| Rated lightning impulse withstand voltage BIL | (kV) | 200 |
| Rated current Ir per socket | (A) | 1250 |
| Rated current Ir contact pin clamping-type | (A) | 3150 |
| Rated current Ir contact pin plug-in-type | (A) | 2200 |
Downloads
Data sheet as pdf-fileDrawing as pdf-file
Accessories
© 2023 PFISTERER Holding AG
We reserve the right to make technical changes.
We reserve the right to make technical changes.
the power connection